| Material | ABS |
| Pieces | 1 |
| Color | Black |
| Installation | No drilling required |
| Dimensions / Weight | See product photos for dimensions |
Compatibility — Read Before Buying
✓ Fits
✗ Does NOT Fit
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Need help with your Tesla? Check out our Tesla Owner Guides for installation tutorials, buying guides, and the latest news.
This insert uses two spring loaded spacers that reduce the size of each cup holder by about 1/2 inch so that a 12 oz. soda can fits nicely with a little wiggle room remaining. The insert is held in place by two rubberized pads so that it stays in place. Can be easily removed if needed.
The cup holder insert works great. It holds all my normal-sized beverage containers in place. No more sloshy spills from merely turning a corner! If you often have larger sized containers, this might not be for you. A standard “venti” Starbucks cup fits great as well as any cups from Dunkin or other to-go cups from restaurants.
I recommend this cup insert by Basenor! It makes a huge difference in keeping water bottles or drink cups in a still position as you are driving. Fits perfectly into the divider between the two cup holders. Easy to install and easy to remove.
Fits perfect! A pet peeve of mine if the model 3, was how my drinks spilled in the cup holder or center console. With this, I no longer have to worry about drinks spilling while going over bumps or taking turns. Highly recommended!!
If you don't have one of these, you NEED to order it ASAP. My 2021 Model Y was delivered 3 days ago and this was on of the cheapest and best purchases I have made for it. I have no clue why the car doesn't come with this but it actually looks Stock, like it came with the vehicle.
This device fits well, but the spring tabs do not provide any pressure on a standard size water bottle. The color does not match the Tesla's center console color.
cup holder insert fits great and holds my drinks snug!
Fits and works well. Looks like it is an original part of the car
Installs simply and without a hitch. Definitely improves the support of the beverage cup.
Good
met expectations
Met all expectations and easy to install
I tried the silicone insert cup holder from another manufacturer first but I didn’t like how sometimes it served its purpose of keeping slimmer items in place but when there were wider items I would have to take out the insert and store it which was annoying. I found this gadget and have been quite happy so far. The spring loaded tabs that stick out and adjust to the cup put in seem sturdy and have done the job well over the past month I’ve had this item. The other allure to this gadget is how it matches the color of the cup holder and tries to appear like it came with the car. While it does a fair job of it, I had to knock off a star because it doesn’t sit as high as the rest of the cup holder and it doesn’t quite look like it came with the car. I still like this item a lot and would recommend buying it.
But it's not the correct color.
Solid product, great fit
Fits perfect, looks good, works great too! I recommend it for sure!
Does what it’s supposed to, but the fit could be better. Extends a little into the cup areas and is not flush at the top. However does well to keep bottles from tipping.
Not a perfect color match for the center console but still looks great. Well made and fit was superb. Pleased. Basenor gets it done.
Easy to install just slides in and makes the cup holder much better, without this drinks tend to slide or tip over.
Installation is a no brainer. Believe it will work well.
Easy to Install and fits perfectly for Model Y
It keeps my Starbuck & other cups in place with no rattles. I an very pleased with this addition to my Tesla.
It works
Super easy to install! You will wish you ordered it sooner.
Product is amazing. No 3m tape. Just slides in and is very secure. Holds my drinks very well.
If you don't have one of these, you NEED to order it ASAP. My 2021 Model Y was delivered 3 days ago and this was on of the cheapest and best purchases I have made for it. I have no clue why the car doesn't come with this but it actually looks Stock, like it came with the vehicle.
Works well. I wish the color matched, but it get the job done
Works to stabilize drinks in the 2021 Tesla model 3. Great value
No complaints. It doesn't match the color of the original cup holder, but I couldn't find any others that do, either. I plan on wrapping it anyway so that's not an issue.It definitely makes the cup holder much more usable and fits in securely, with no adhesive, so that's nice. I'll be getting rubber liners for the bottom as well, so I'll update when I have those installed and see if it plays nice.
The feature that I enjoy the most is that it holds the beverages in place. Now all I need is a mini-refrigerator in the console to keep additional beverages cold!I recommend this product!
I had read a couple people say this would pop out of their Tesla, but for me it is in very tight. Have only had it for a few days, but so far it is working as expected and holding my Starbucks iced cups firmly enough for regular usage.
Fits perfect! A pet peeve of mine if the model 3, was how my drinks spilled in the cup holder or center console. With this, I no longer have to worry about drinks spilling while going over bumps or taking turns. Highly recommended!!
For the price is works well. A lot of cups still don’t fit the space even with this and it’s ‘arm’. Would be better if it extended out a little bit more. Overall an improvement though and installs as if it was factory visually.
Should be OEM. Buy if you hate cups rattling around
This device fits well, but the spring tabs do not provide any pressure on a standard size water bottle. The color does not match the Tesla's center console color.
Perfect fit and works as expected. No idea on durability as I've only owned it a couple of weeks, but so far it's holding up well and it seems well made.
Super easy to install. Just slides in and holds drinks like any other standard cup holder. Can’t tell that it’s an external add on. Best part no glue or stickers! Worth the purchase.
Fits snug without the adhesion pads in use which I love! I have the sticky pads if I ever need them, but the fit is so perfect I doubt I ever will.
