Tesla 2026.38 Rolls Out: Supercharger Site Maps and Security Fixes

πŸ“Œ UPDATE β€” September 30, 2026

Tesla has begun the initial rollout of 2026.38, currently reaching less than 1% of the fleet. Beyond the previously reported Supercharger Site Maps and Security Fixes, the update also includes a Visual Updates feature exclusive to vehicles with Intel Atom processors β€” delivering higher-quality images of your Tesla and an improved parking environment on the center screen. This Intel Atom-specific enhancement was not included in the original release notes and represents an additional improvement for older MCU hardware owners.

Tesla 2026.38 release notes showing Visual Updates for Intel Atom

Tesla's newest software update, version 2026.38, has begun its rollout β€” first spotted early this morning on a Model 3 AWD Long Range in Utrecht, Netherlands. Two confirmed features are on board: Supercharger Site Maps and Security Improvements. If you're not seeing it yet, here's what to expect and how to stay ahead of the queue.

NowRollingOut tweet announcing Tesla software update 2026.38
Source: @NowRollingOut β€” September 30, 2026

What's in 2026.38

Change Type Models
Supercharger Site Maps Official Model 3, Model Y, Cybertruck
Security Improvements Official All supported vehicles

The Supercharger Site Maps feature gives you a real-time bird's-eye view of a station's layout directly on your car's display β€” open stalls, on-site obstacles, and the physical arrangement of chargers before you pull in. According to teslahubs.com, the 3D version of this feature first launched as a pilot in late 2025 at 18 locations in California and Texas, expanded to over 300 sites by February 2026, and has since grown to cover the vast majority of U.S. locations, with international expansion ongoing. Seeing it land in a dedicated OTA update suggests Tesla is pushing broader in-car enablement to match the app-side rollout that began with Tesla app version 4.61.0 in September 2026.

Teslascope release note showing Supercharger Site Maps feature in 2026.38
Source: @teslascope β€” September 30, 2026

The Security Improvements entry is listed without additional detail in the early release notes β€” a common pattern for Tesla's under-the-hood hardening changes. These typically cover vehicle access, key authentication, or network-layer protections and don't require any action from owners.

Teslascope release note showing Security Improvements feature in 2026.38
Source: @teslascope β€” September 30, 2026

How to Check for the Update and Use the New Features

The update is in very early rollout as of this writing β€” one vehicle confirmed in the Netherlands. Tesla staggers OTA deployments over days to weeks, so most owners won't see it immediately. Here's how to position yourself to get it sooner and make the most of it when it arrives.

Step 1 β€” Check your current version

On your touchscreen, go to Controls > Software. Your current version number is displayed at the top. If you're already on 2026.38, you're set.

Step 2 β€” Request the update

If an update is available but hasn't installed, you'll see a notification in the Software menu. Tap Install Now to begin, or schedule it for off-peak hours. Make sure your car is connected to Wi-Fi β€” Tesla OTA updates do not download over LTE.

Step 3 β€” Find Supercharger Site Maps on your display

Once updated, Site Maps appear automatically when you navigate to a Supercharger destination or tap a Supercharger pin on the map. The layout view loads as you approach the station. No setting to enable β€” it activates on supported stations. Coverage varies by location; stations that have been 3D-mapped will show the full layout, while others display the standard stall list.

Step 4 β€” Cross-check with the Tesla app

If you're running Tesla app version 4.61.0 or later on your phone, you already have access to Supercharger Site Maps in the app. The in-car version in 2026.38 brings the same view to your touchscreen without needing to pull out your phone. Both should stay in sync on stall availability.

Step 5 β€” Nothing to do for Security Improvements

These apply automatically on install. No configuration required. If you use Phone Key or a key card, your existing setup continues to work β€” this is a background hardening update.

This is an early-stage rollout with full release notes still pending. @NowRollingOut has noted that more details will follow as the version spreads. Keep an eye on your Software menu over the next few days β€” and check our all software updates coverage as the full changelog fills in.

πŸ“‹ Tracking Tesla software? See every firmware, FSD and app version in one place in our Tesla Software Update Tracker.

Related Gear

Gear up your Tesla with tested, custom-fit BASENOR accessories β€” shop Tesla accessories β†’

Sources & reporting notes

The links below identify the material source records used for this report.

  1. @NowRollingOut on X (2026-09-30T05:46:08.000Z) β€” Direct source
  2. @teslascope on X (2026-09-30T05:51:14.000Z) β€” Direct source
  3. @teslascope on X (2026-09-30T05:51:17.000Z) β€” Direct source
  4. @teslascope on X (2026-09-30T05:51:19.000Z) β€” Direct source

Source links are preserved as published or accessed. See our editorial standards and corrections policy.


BASENOR Newsroom

The BASENOR Editorial Desk covers Tesla, SpaceX, and related technology, curating reporting from primary sources β€” official accounts, regulatory filings, and software release data. Every article passes source-record and fact-checking review before publication. About the newsroom.

This report was curated by the BASENOR Editorial Desk from the sources listed above. Read our editorial standards or email editorial@basenor.com to report an error.

Charging, Software & features

Stay in the Loop

Join 27,000+ Tesla owners who get our tips first β€” plus 10% OFF

Shop Tesla Accessories — Free USA Shipping

Keep Reading