Main menu

Tesla Model Y Console Organizers 2020–2024 — Legacy Storage

12 products

Showing 1 - 12 of 12 products

Two Tiers, Two Opportunities — The Legacy Y Console Setup

The 2020–2024 Model Y console is a two-story storage system: a shallow upper tray sitting under the screen (where your phone lands) and a deep lower well with a sliding cover (where you lose your AirPods for three weeks). Most aftermarket organizers stop at the upper tray. Ours address both levels plus the rear bench — a spot that matters on Model Y more than any other Tesla because the 5- and 7-seat configs put kids and pets back there. Fourteen Legacy-fit pieces, priced $9.99–$39.99, cover the upper tray, the lower well, cup-holder inserts, armrest protection, the rear trash can, and anti-kick mats for the back of the front seats.

Buying Guide: What Goes Where

Think about your console in zones. The upper zone (under the screen) wants a 3-piece carbon-fiber tray ($34.99) to slot phones, cards, and coins. The lower zone (deep well) wants the TPE bottom-storage insert ($24.99) to divide the pit into three compartments. The cup-holder zone gets the Trenta-fit insert ($14.99) — essential if you've ever watched a Yeti tumbler swing sideways at a light. The armrest gets the TPU non-slip cover ($29.99) to stop key-card scuffs. And the rear zone — where most MY owners underspend — gets the MY-specific rear trash can ($34.95) with anti-slip base plus anti-kick mats ($34.99) to protect the rear of the front seats from kids' shoes.

Zone	Recommended SKU	Why	Price
Upper tray (under screen)	Carbon Fiber 3PCS Console Organizer	Divides phone, cards, coins	$34.99
Lower well (deep pit)	TPE Lower Console Organizer	3-compartment split, wipe-clean	$24.99
Cup holders	Carbon Edition Cup Holder Insert	Grips Trenta + Yeti 20/30 oz	$14.99
Armrest top	TPU Non-Slip Console Cover	Anti-scuff, non-slip phone grip	$29.99
Rear bench (pet / kid)	MY Rear Console Trash Can	Anti-slip base, strap mount	$34.95
Back of front seats	MY Center Console Anti-Kick Mats (2PCS)	Waterproof, removable	$34.99

Legacy Fit Window: Will This Fit Mine?

Every piece on this page is measured for 2020–2024 Legacy Model Y — the pre-Juniper trim. A 2024-built car is still Legacy if it has physical turn-signal stalks and a physical gear stalk on the steering column. If your 2024 or 2025 MY has touchscreen shifting and a different interior trim, it's a Juniper and you need the Juniper collection instead. The 5-seater and 7-seater share the console geometry — everything here fits both.

Frequently Asked Questions

Will a 2025 Juniper organizer fit my 2023 Legacy Model Y?

No. Juniper borrowed the Highland-style console — taller armrest, redesigned lower well, different cup-holder spacing. A Juniper-fit set sits proud on a Legacy and may prevent the sliding lid from closing. Check your shifter: physical stalk = Legacy, touchscreen shifting = Juniper. Every SKU on this page is measured for Legacy geometry only.

Does the lower-console TPE tray still let the sliding cover close?

Yes. The TPE lower insert is cut 3 mm below the rim of the well so the sliding cover closes flush without forcing it. We tested it with a loaded tray (phone, AirPods, three charging cables, a tire gauge) and the lid still slides both directions silently. If it drags, lift the insert and rotate 180 degrees — the keyed side goes toward the rear.

Can I install the rear-console trash can in a 7-seater Model Y?

Yes. The rear trash can mounts via an adjustable strap that loops around the front-seat headrest posts, not the floor or seat track — which means the 7-seat second-row layout and the folded third row are both fine. On 7-seaters we recommend the center position so both second-row passengers can reach it. Strap handles 2020–2024 Legacy headrest diameters.

The factory cup holders are too deep for short cans — is there a shallow insert?

Yes — the Carbon Edition Cup Holder Insert ($14.99) raises short cans (La Croix, Red Bull 8.4 oz) by roughly 35 mm so they sit flush with the top of the well and come out cleanly when you grab them. It still holds Trenta tumblers and Yeti 30 oz at full depth. No adhesive — it lifts out for washing.

Do the anti-kick mats attach with adhesive or clip into the seat frame?

Adhesive-free. The MY anti-kick mats use a tensioned elastic loop that slips around the front-seat headrest posts, then the lower edge tucks behind the seatback map pocket to stay taut. No glue residue, no damage to the factory material. Removable in under 30 seconds for washing. Fits both cloth and perforated-leather Legacy MY seat styles.